{"id":204,"date":"2026-07-20T03:58:48","date_gmt":"2026-07-20T03:58:48","guid":{"rendered":"https:\/\/kettenrad-zahnrader.com\/?post_type=product&p=204"},"modified":"2026-07-20T03:58:48","modified_gmt":"2026-07-20T03:58:48","slug":"ep-5x2-5mm-european-sprockets-03b-1-series","status":"publish","type":"product","link":"https:\/\/kettenrad-zahnrader.com\/id\/product\/ep-5x2-5mm-european-sprockets-03b-1-series\/","title":{"rendered":"Sproket Eropa EP-5\u00d72.5mm \u2014 Seri 03B-1"},"content":{"rendered":"
\n
\n

Sproket Eropa EP-5\u00d72.5mm \u2014 Seri 03B-1<\/h2>\n

Precision-engineered to DIN 8187 & ISO\/R 606 standards, the EP 03B-1 series of European Sprockets<\/strong> is engineered for demanding power transmission applications where dimensional accuracy and long service life are non-negotiable. With a 5 mm pitch and 2.5 mm internal chain width, these European Standard Sprockets cover tooth counts from Z=8 all the way up to Z=125, giving engineers exceptional flexibility for both compact mechanisms and high-load industrial drive systems.<\/p>\n

Whether you are sourcing roda gigi dan sproket<\/strong> for agricultural machinery in Colombia \u2014 including high-quality European Sprocket<\/strong> solutions, industrial conveyors in Germany, or automated packaging lines across Europe, the 03B-1 format delivers the interchangeability and tolerance control that multinational supply chains depend on. Every European Sprocket<\/strong> tooth profile in this series is verified in line with DIN 8187, ensuring reliable chain engagement and predictable wear patterns over hundreds of thousands of operating cycles.<\/p>\n

Sproket Standar Eropa <\/a><\/div>\n<\/div>\n

<\/p>\n

1. Technical Specification Parameters<\/h2>\n

The table below lists the full dimensional data for the 03B-1 Simplex European Sprockets<\/strong> series (5\u00d72.5 mm pitch). Dimensions are in millimetres. Tooth profile geometry: Tooth radius r\u2083 = 5 mm | Radius width C = 0.6 mm | Tooth width B\u2081 = 2.3 mm. Note: From Z=80, hub plate width H increases to 4 mm.<\/p>\n

<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Z (Teeth)<\/th>\nd\u2091 (mm)<\/th>\nd\u209a (mm)<\/th>\nd\u2098 (mm)<\/th>\nD\u2081 (mm)<\/th>\nA (mm)<\/th>\n<\/tr>\n<\/thead>\n
8<\/td>\n15.2<\/td>\n13.06<\/td>\n7<\/td>\n4<\/td>\n10<\/td>\n<\/tr>\n
9<\/td>\n16.8<\/td>\n14.62<\/td>\n8<\/td>\n5<\/td>\n10<\/td>\n<\/tr>\n
10<\/td>\n18.3<\/td>\n16.18<\/td>\n9<\/td>\n5<\/td>\n10<\/td>\n<\/tr>\n
11<\/td>\n19.9<\/td>\n17.75<\/td>\n11<\/td>\n6<\/td>\n10<\/td>\n<\/tr>\n
12<\/td>\n21.5<\/td>\n19.32<\/td>\n12<\/td>\n6<\/td>\n10<\/td>\n<\/tr>\n
13<\/td>\n23.0<\/td>\n20.89<\/td>\n14<\/td>\n6<\/td>\n10<\/td>\n<\/tr>\n
14<\/td>\n24.6<\/td>\n22.47<\/td>\n15<\/td>\n6<\/td>\n10<\/td>\n<\/tr>\n
15<\/td>\n26.2<\/td>\n24.04<\/td>\n16<\/td>\n8<\/td>\n10<\/td>\n<\/tr>\n
16<\/td>\n27.8<\/td>\n25.63<\/td>\n18<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
17<\/td>\n29.4<\/td>\n27.20<\/td>\n18<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
18<\/td>\n30.9<\/td>\n28.79<\/td>\n18<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
19<\/td>\n32.5<\/td>\n30.38<\/td>\n18<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
20<\/td>\n34.1<\/td>\n31.96<\/td>\n18<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
21<\/td>\n35.7<\/td>\n33.54<\/td>\n20<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
22<\/td>\n37.3<\/td>\n35.13<\/td>\n20<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
23<\/td>\n38.9<\/td>\n36.72<\/td>\n20<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
24<\/td>\n40.5<\/td>\n38.30<\/td>\n20<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
25<\/td>\n42.0<\/td>\n39.89<\/td>\n20<\/td>\n8<\/td>\n13<\/td>\n<\/tr>\n
26<\/td>\n43.6<\/td>\n41.48<\/td>\n25<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
27<\/td>\n45.2<\/td>\n43.07<\/td>\n25<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
28<\/td>\n46.8<\/td>\n44.65<\/td>\n25<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
29<\/td>\n48.4<\/td>\n46.25<\/td>\n25<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
30<\/td>\n50.0<\/td>\n47.83<\/td>\n25<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
31<\/td>\n51.6<\/td>\n49.42<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
32<\/td>\n53.2<\/td>\n51.01<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
33<\/td>\n54.8<\/td>\n52.60<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
34<\/td>\n56.3<\/td>\n54.19<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
35<\/td>\n57.9<\/td>\n55.78<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
36<\/td>\n59.5<\/td>\n57.37<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
37<\/td>\n61.1<\/td>\n58.96<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
38<\/td>\n62.7<\/td>\n60.54<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
39<\/td>\n64.3<\/td>\n62.13<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
40<\/td>\n65.9<\/td>\n63.73<\/td>\n30<\/td>\n8<\/td>\n15<\/td>\n<\/tr>\n
41<\/td>\n67.5<\/td>\n65.30<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
42<\/td>\n69.1<\/td>\n66.91<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
43<\/td>\n70.6<\/td>\n68.49<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
44<\/td>\n72.2<\/td>\n70.09<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
45<\/td>\n73.8<\/td>\n71.68<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
46<\/td>\n75.4<\/td>\n73.27<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
47<\/td>\n77.0<\/td>\n74.86<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
48<\/td>\n78.6<\/td>\n76.45<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
49<\/td>\n80.2<\/td>\n78.03<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
50<\/td>\n81.8<\/td>\n79.63<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
51<\/td>\n83.4<\/td>\n81.22<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
52<\/td>\n85.0<\/td>\n82.81<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
53<\/td>\n86.6<\/td>\n84.40<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
54<\/td>\n88.1<\/td>\n85.97<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
55<\/td>\n89.7<\/td>\n87.58<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
56<\/td>\n91.3<\/td>\n89.17<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
57<\/td>\n92.9<\/td>\n90.76<\/td>\n40<\/td>\n8<\/td>\n18<\/td>\n<\/tr>\n
58<\/td>\n94.5<\/td>\n92.35<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
59<\/td>\n96.1<\/td>\n93.94<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
60<\/td>\n97.7<\/td>\n95.53<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
62<\/td>\n100.9<\/td>\n98.72<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
64<\/td>\n104.1<\/td>\n101.9<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
65<\/td>\n105.6<\/td>\n103.49<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
66<\/td>\n107.2<\/td>\n105.08<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
68<\/td>\n110.4<\/td>\n108.26<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
70<\/td>\n113.6<\/td>\n111.44<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
72<\/td>\n116.8<\/td>\n114.63<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
75<\/td>\n121.6<\/td>\n119.40<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
76<\/td>\n123.1<\/td>\n120.99<\/td>\n50<\/td>\n8<\/td>\n20<\/td>\n<\/tr>\n
78<\/td>\n126.3<\/td>\n124.17<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n
80<\/td>\n129.5<\/td>\n127.35<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n
85<\/td>\n137.5<\/td>\n135.31<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n
90<\/td>\n145.4<\/td>\n143.27<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n
95<\/td>\n153.4<\/td>\n151.22<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n
100<\/td>\n161.3<\/td>\n159.18<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n
110<\/td>\n177.2<\/td>\n175.09<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n
114<\/td>\n183.6<\/td>\n181.45<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n
120<\/td>\n193.2<\/td>\n191.01<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n
125<\/td>\n201.1<\/td>\n198.96<\/td>\n70<\/td>\n8<\/td>\n30<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

\n\n\n\n\n\n\n\n
Chain Parameter<\/th>\nValue (mm)<\/th>\nSprocket Parameter<\/th>\nValue (mm)<\/th>\n<\/tr>\n<\/thead>\n
Pitch<\/td>\n5<\/td>\nTooth radius r\u2083<\/td>\n5<\/td>\n<\/tr>\n
Internal width<\/td>\n2.5<\/td>\nRadius width C<\/td>\n0.6<\/td>\n<\/tr>\n
Roller \u00d8<\/td>\n3.2<\/td>\nTooth width B\u2081<\/td>\n2.3<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Note: H = 4 mm \u2014 from Z=80, the hub plate width is increased for structural reinforcement at higher torque loads.<\/em><\/p>\n

\"kettenrad-zahnrader-products-EP-5\u00d72.5mm<\/p>\n

\n

2. Five Key Product Advantages<\/h2>\n

The EP-5\u00d72.5mm 03B-1 European Sprockets<\/strong> line is built around five core performance pillars that differentiate it from generic off-the-shelf alternatives available in the market today.<\/p>\n

\n
\n

\u2460 DIN 8187 \/ ISO\/R 606 Conformity<\/strong><\/p>\n

Every tooth profile is verified against the European DIN 8187 standard, guaranteeing dimensional compatibility with all 03B roller chains and ensuring drop-in interchangeability across compliant drive systems worldwide. This makes procurement straightforward for OEM engineers and maintenance teams alike.<\/p>\n<\/div>\n

\n

\u2461 CNC-Machined Tooth Profile Precision<\/strong><\/p>\n

Tooth profiles are cut on modern CNC machining centers that hold tolerances matching DIN quality grade specifications. The result is a consistent tooth radius (r\u2083 = 5 mm) and controlled radius width C = 0.6 mm across every batch, minimising noise and vibration even at elevated speeds in industrial environments.<\/p>\n<\/div>\n

\n

\u2462 Wide Tooth Count Range (Z=8 to Z=125)<\/strong><\/p>\n

From miniature Z=8 European Sprocket<\/strong> units for compact bicycle chainring drives to large Z=125 units suited to heavy industrial conveyors and agricultural equipment, the full range eliminates the need for multiple suppliers, simplifying logistics and reducing lead times for both standard and custom engineered projects.<\/p>\n<\/div>\n

\n

\u2463 Premium Material Selection<\/strong><\/p>\n

Standard units are manufactured from C45 carbon steel with optional case-hardening treatments. For corrosive or food-grade environments, stainless steel sprockets & gears<\/strong> \u2014 fully dimensioned as European Sprocket<\/strong> variants \u2014 are available on request. A hardened bore and precision-ground hub ensure concentricity tolerances that exceed basic market expectations.<\/p>\n<\/div>\n

\n

\u2464 Stock Availability & Custom OEM Support<\/strong><\/p>\n

Popular tooth counts are held in stock for immediate shipment to European Sprocket<\/strong> customers in Europe, South America, and Southeast Asia. For OEM programs requiring non-standard hub diameters, keyway dimensions, or surface treatments, our engineering team provides fully customised European Sprocket<\/strong> and custom sprockets gears<\/strong> with full dimensional documentation.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

3. How European Sprockets Work<\/h2>\n

A sprocket is a profiled wheel with teeth that mesh directly with the links of a roller chain. Unlike gears, which transfer motion through tooth-to-tooth contact with another gear, sprockets and chains<\/strong> form an interlocking system where chain rollers seat into the curved tooth pockets of each European Sprocket<\/strong>‘s circumference. The pitch \u2014 5 mm for the 03B-1 European Sprockets<\/strong> series \u2014 is the critical dimension that must match the chain’s pitch exactly, because any mismatch introduces impact loading, accelerated wear, and eventual drive failure.<\/p>\n

When the drive shaft rotates the driving European Sprocket<\/strong>, each chain link engages a tooth sequentially. The chain wraps around the arc defined by the pitch diameter (d\u209a), transmitting torque to the driven European Sprocket<\/strong> at the opposite end of the chain run. Tooth radius r\u2083 = 5 mm and the seating curve geometry defined by ISO\/R 606 determine how smoothly rollers enter and leave engagement \u2014 a geometry that directly governs noise level, chain elongation rate, and overall system efficiency. The tooth width B\u2081 = 2.3 mm is carefully matched to the chain’s inner width of 2.5 mm, providing just enough clearance for free articulation while preventing lateral slip. For larger European Sprocket<\/strong> sizes (from Z=80 onward), the hub plate width H increases to 4 mm, reinforcing structural integrity at the elevated torque loads that accompany larger-diameter drive systems.<\/p>\n<\/div>\n

<\/p>\n

\n

4. Material & Construction<\/h2>\n

The material selection for roller chain sprockets<\/strong> across the 03B-1 European Sprocket<\/strong> range balances mechanical strength, machinability, and long-term durability across a wide range of operating environments. The standard production material is medium-carbon C45 steel, which offers a tensile strength in the range of 600\u2013800 MPa in its normalised condition and responds predictably to induction or case-hardening treatments that elevate surface hardness to 50\u201360 HRC while preserving a tough, ductile core.<\/p>\n

For applications exposed to moisture, mild chemicals, or food-processing wash-downs, stainless steel sprockets & gears<\/strong> \u2014 available across the full European Sprocket<\/strong> tooth count range \u2014 in 304 or 316L grade are an ideal choice. These grades resist pitting and general corrosion without sacrificing the dimensional accuracy achieved during CNC hobbing. Grey cast iron (GG25) versions are offered for low-speed, high-load applications where vibration damping is prioritised over weight reduction. All European Sprocket<\/strong> blanks are sourced from certified bar stock with full material traceability documentation, supporting the EEAT requirements of procurement teams operating within ISO 9001 quality management frameworks.<\/p>\n

\n
Baja Karbon C45<\/strong>
\nStandard grade; heat-treatable; ideal for high-cycle industrial drives<\/span><\/div>\n
Stainless Steel 304 \/ 316L<\/strong>
\nCorrosion-resistant; food-grade approved environments; marine & chemical sectors<\/span><\/div>\n
Cast Iron GG25<\/strong>
\nCost-effective for low-speed, high-torque, vibration-dampening applications<\/span><\/div>\n
Plastic \/ Engineering Polymer<\/strong>
\nLightweight, low-noise; suited to plastic sprockets and gears<\/strong> and compact European Sprocket<\/strong> configurations in light-duty automation<\/span><\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

5. Application Scenarios<\/h2>\n

The broad tooth count range and strict DIN compliance of EP-5\u00d72.5mm European Sprockets<\/strong> makes them suitable for a wide variety of end-use environments. Below are the primary sectors where 03B-1 European Sprocket<\/strong> units deliver consistent, measurable value \u2014 from light industrial automation in Colombia to heavy agricultural operations across European markets.<\/p>\n

\n
\n

Mesin Pertanian<\/h3>\n

Combines, forage balers, planting equipment, and irrigation drive systems consistently rely on 03B-1 roller chain sprockets<\/strong> \u2014 precision-made European Sprocket<\/strong> components \u2014 to transmit power from PTO shafts to working implements. The robust C45 steel construction withstands the shock loads and dust exposure inherent to field operations, while the standardised 5 mm pitch ensures availability of replacement parts at dealers throughout Europe and Latin America, including Colombia’s growing agribusiness sector.<\/p>\n<\/div>\n

\n

Industrial Conveyor Systems<\/h3>\n

Logistics sorting lines, food processing conveyors, and packaging systems frequently specify industrial sprockets and gears<\/strong> \u2014 particularly the 03B-1 European Sprocket<\/strong> format \u2014 for its predictable chain pitch engagement. The consistent tooth geometry across all tooth counts allows designers to vary ratio within a single drive train without changing the chain standard, keeping inventory complexity low and enabling fast line changeovers.<\/p>\n<\/div>\n

\n

Bicycle & Light Drive Systems<\/h3>\n

The 03B-1 European Sprocket<\/strong> at the lighter end of the tooth count spectrum \u2014 Z=8 through Z=25 \u2014 is regularly specified for bike chainrings<\/strong> and small drive systems in e-bike retrofit kits, cargo bike rear cassettes, and pedal-assist motor stages. The compact outer diameter (15.2 mm at Z=8 up to 42.0 mm at Z=25) fits within tight frame clearances while delivering the torque capacity required for loaded urban cycling applications.<\/p>\n<\/div>\n

\n

Printing & Textile Machinery<\/h3>\n

High-speed printing presses and textile looms depend on drive components that maintain timing accuracy over millions of cycles. The controlled tooth profile geometry of 03B-1 European Sprockets<\/strong> ensures consistent chain wrap angles and predictable tensioner loads, which is critical for registration accuracy in printing applications and pick timing in weaving machinery used throughout the manufacturing base in Europe and Colombia.<\/p>\n<\/div>\n

\n

Automation & Robotics<\/h3>\n

Collaborative robot joint actuators, automated guided vehicle (AGV) drivetrains, and palletiser arms increasingly use compact roda gigi dan sproket<\/strong> \u2014 including the 03B European Sprocket<\/strong> format \u2014 because the 5 mm pitch chain delivers the torque density of larger chains at reduced weight and envelope dimensions. The precision bore tolerance available on custom OEM builds supports direct shaft mounting without additional adapters.<\/p>\n<\/div>\n

\n

Mining & Construction Equipment<\/h3>\n

At the large-tooth-count end \u2014 Z=80 through Z=125 \u2014 the reinforced hub plate width (H = 4 mm) makes the 03B-1 industrial sprockets and gears<\/strong> within the European Sprocket<\/strong> family suitable for slow-speed, high-torque auxiliary drives on crushing equipment, underground conveyors, and concrete mixing plants. These units are typically produced from case-hardened C45 steel and supplied with surface treatment options including zinc phosphate or black oxide for improved corrosion performance.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

6. Applicable Standards & Regional Regulations<\/h2>\n

When sourcing Sproket Standar Eropa<\/strong> for cross-border industrial projects, compliance with both product standards and regional machinery directives is essential. The following regulatory context applies to users of 03B-1 European Sprocket<\/strong> components and associated chain drive hardware.<\/p>\n

\n
\n

European Union \u2014 Machinery Directive 2006\/42\/EC<\/strong><\/p>\n

Power transmission components used in machinery placed on the EU market must conform to the Machinery Directive. European Sprockets<\/strong> conforming to DIN 8187 \/ ISO\/R 606 are accepted as standard components and do not individually require CE marking, but the assembled machine must comply. Germany’s DIN standards body (DIN e.V.) and the European Committee for Standardization (CEN) provide the normative reference framework.<\/p>\n<\/div>\n

\n

Germany \u2014 DIN 8187 & DIN 8181<\/strong><\/p>\n

Sprockets Germany<\/strong> production is governed primarily by DIN 8187 for roller chain European Sprocket<\/strong> profiles and DIN 8181 for short-pitch precision chains. Any European Sprocket<\/strong> sold or used as a replacement kettenrad zahnrader<\/strong> component in German machinery must meet these dimensional and quality tolerances. Our 03B-1 series is fully documented to DIN 8187 and available with quality certificates on request.<\/p>\n<\/div>\n

\n

Colombia \u2014 ICONTEC & Import Regulations<\/strong><\/p>\n

Colombia’s national standards body ICONTEC adopts ISO standards for mechanical power transmission components. Importers of industrial chains and sprockets<\/strong> \u2014 including the 03B-1 European Sprocket<\/strong> range \u2014 into Colombia must comply with DIAN customs classifications (HS 8483.40 for sprockets and chain wheels) and provide certificate of origin documentation. ISO\/R 606-compliant components such as this 03B-1 series are accepted without additional certification when accompanied by dimensional test reports.<\/p>\n<\/div>\n

\n

UK \u2014 UKCA Marking (Post-Brexit)<\/strong><\/p>\n

Since January 2021, machinery placed on the UK market requires UKCA marking in place of CE. Power transmission components such as roller chain sprockets<\/strong>, including European Sprocket<\/strong> variants, that comply with the equivalent transposed British Standards (BS EN ISO 606) are accepted. Our documentation package includes dimensional conformity records compatible with both CE (EU) and UKCA (UK) audit requirements.<\/p>\n<\/div>\n

\n

USA \u2014 ANSI\/ASME B29.1<\/strong><\/p>\n

While the 03B-1 is a European standard format, our manufacturing capabilities extend to ANSI\/ASME B29.1 compliant sprockets for US market projects alongside the core European Sprocket<\/strong> DIN range, providing a genuine one-stop source for global industrial procurement teams. The difference between sprockets and gears<\/strong> under US regulations is addressed in AGMA and ASME standards respectively.<\/p>\n<\/div>\n

\n

RoHS & REACH (EU Environmental)<\/strong><\/p>\n

Surface treatments applied to steel sprockets and gears<\/strong> in the European Sprocket<\/strong> range \u2014 including zinc plating and phosphate coatings \u2014 must comply with EU RoHS Directive 2011\/65\/EU and REACH Regulation EC 1907\/2006. Our production process uses RoHS-compliant plating chemistries and all hazardous substance declarations (SVHC) are available in the product compliance documentation upon request.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\"\"<\/p>\n

\n

7. Compatible Products & System Solutions<\/h2>\n

A well-specified European Sprocket<\/strong> is only part of a complete drive system. To help customers build complete, reliable power transmission assemblies, we also supply the following complementary products \u2014 making us a genuine single-source supplier for roda gigi dan sproket<\/strong>, particularly European Sprocket<\/strong> components, and their matched drive components.<\/p>\n

\n
\n

Roller Chain \u2014 Matched Pitch Drive Components<\/h3>\n

Every European Sprockets<\/strong> installation requires a correctly matched roller chain to operate within rated parameters. Our affiliated supply network provides ISO-compliant 03B-1 pitch roller chains in simplex, duplex, and triplex strand configurations. Purchasing matched sprockets and chains<\/strong><\/a> \u2014 with each European Sprocket<\/strong> selected from the verified 03B-1 range \u2014 eliminates tolerance stack-up risk and simplifies warranty documentation.<\/p>\n

\"Roller<\/div>\n<\/div>\n
\n

NMRV Worm Reducers \u2014 Speed Matching & Torque Control<\/h3>\n

For applications where the drive motor speed must be reduced before reaching the European Sprocket<\/strong> drive stage, NMRV worm gear reducers provide compact, self-locking speed reduction in ratios from 5:1 to 100:1. Pairing an NMRV reducer output shaft with a correctly selected 03B-1 European Sprockets<\/strong> drive provides a clean, efficient solution for conveyor head drives, agitator drives, and similar variable-speed industrial applications. This combination represents the kind of one-stop supply advantage that procurement teams operating across industrial sprockets and gears<\/strong> and European Sprocket<\/strong> categories value most.<\/p>\n

\"NMRV<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

8. About Us<\/h2>\n

Operating since 2010, we bring over a decade of focused manufacturing expertise to the global power transmission components market. Our production facility is purpose-built for precision industrial sprockets and gears<\/strong>, including the full European Sprocket<\/strong> range, equipped with modern CNC hobbing and machining centers that hold tooth profile tolerances to DIN quality grade levels throughout every production run. We do not outsource machining operations \u2014 every European Sprocket<\/strong> tooth is cut and inspected on our own controlled equipment, which gives us full accountability for dimensional quality on every shipment.<\/p>\n

Our product catalog covers three major sprocket standards<\/strong> \u2014 European DIN\/ISO, American ANSI\/ASME, and Asian JIS \u2014 as well as a comprehensive range of spur gears, bevel gears, and racks conforming to DIN 782. This breadth means that when customers are specifying a complete drive train, they can source roda gigi dan sproket<\/strong> \u2014 from European Sprocket<\/strong> DIN series through to ANSI and JIS formats \u2014 from a single qualified supplier, dramatically reducing supplier management overhead. We maintain stock inventory of fast-moving tooth count sizes for same-week shipment globally, and our engineering team supports custom OEM projects requiring non-standard bore dimensions, keyways, or surface treatments \u2014 with full dimensional documentation for incoming inspection teams. Whether you need a new kettenrad zahnrader<\/strong> for a direct replacement kettenrad zahnrader<\/strong> application or a specially engineered component for a new machine design, our team is ready to quote accurately and deliver on schedule.<\/p>\n

Each gear tooth profile accuracy is documented in line with DIN 3961 \/ ISO 1328 quality levels, and every European Sprocket<\/strong> tooth profile is verified per DIN 8187, ANSI B29.1, or JIS B 1801 as applicable. We serve customers directly across Europe \u2014 including Germany, Spain, Italy, Poland, and the Netherlands \u2014 as well as growing markets in Colombia, Mexico, Brazil, and Southeast Asia.<\/p>\n

Bengkel<\/h3>\n
\n
\"Lokakarya
\n\"Lokakarya
\n\"Lokakarya
\n\"Lokakarya<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Pertanyaan yang Sering Diajukan<\/h2>\n
\nQ1. What is the difference between European sprockets and ANSI sprockets, and which one do I need for my conveyor system?<\/summary>\n

European sprockets conform to DIN 8187 and ISO\/R 606 standards and use metric pitch dimensions, whereas ANSI sprockets follow ANSI\/ASME B29.1 with inch-based pitches. For drives already running DIN-compliant chain, only a genuine European Sprocket<\/strong> will engage correctly. For a drive system already using 03B or 04B chain, you need DIN\/ISO European standard sprockets. If your system uses #25, #35, or #40 chain, ANSI sprockets apply. Mixing the two standards causes accelerated wear and chain jump \u2014 always verify your existing chain markings before ordering a replacement.<\/p>\n<\/details>\n

\nQ2. How do I calculate the correct European Sprocket<\/strong> size for a specific chain drive gear ratio in an agricultural machine?<\/summary>\n

Drive ratio is determined by dividing the tooth count on the driven European Sprocket<\/strong> by the tooth count on the driving European Sprocket<\/strong>. For example, a Z=40 driving European Sprocket<\/strong> paired with a Z=20 driven unit gives a 2:1 speed reduction. Pitch diameter (d\u209a) values for each tooth count are listed in the specification table above, allowing you to verify that the selected pair fits within your machine’s available centre-distance envelope. Our technical team can assist with centre-distance and chain length calculations at no charge.<\/p>\n<\/details>\n

\nQ3. What material options are available for stainless steel European sprockets used in food processing environments in Europe?<\/summary>\n

For food processing lines subject to wash-down procedures and hygiene regulations under EU Regulation 1935\/2004 (food contact materials), we recommend 316L stainless steel European Sprocket<\/strong> variants. This grade offers improved chloride resistance compared to 304 and meets the surface quality requirements of EHEDG and NSF guidelines. Passivation treatment is available on request to further enhance corrosion resistance and reduce surface roughness in food-contact zones.<\/p>\n<\/details>\n

\nQ4. Are these European sprockets compatible with double chain sprocket gear configurations for heavy industrial drives?<\/summary>\n

The 03B-1 series shown here is configured for simplex (single-strand) chain. For double chain sprocket gear<\/strong> applications requiring duplex chain, we produce 03B-2 duplex European Sprocket<\/strong> variants with the corresponding increased tooth width dimensions. Duplex configurations are commonly used in industrial applications where single-strand torque capacity is insufficient \u2014 contact us for sizing assistance and a quote on the appropriate duplex variant.<\/p>\n<\/details>\n

\nQ5. How much does it cost to get a custom European sprocket with a non-standard bore diameter for an OEM project?<\/summary>\n

Custom bore sizes, keyway dimensions, and set-screw positions are available for OEM projects with minimum order quantities typically starting from 10 pieces per specification. Pricing depends on the tooth count, material grade, surface treatment, and required documentation level.<\/p>\n<\/details>\n

\nQ6. What is the difference between sprockets and gears, and when should I use a chain drive instead of a gear drive?<\/summary>\n

Itu difference between gears and sprockets<\/strong> lies in how they transmit motion. Gears mesh directly through tooth-to-tooth contact and suit short centre distances. A quality European Sprocket<\/strong> works with an intermediate roller chain and excel at longer centre distances, misalignment tolerance, and applications where the driven shaft must be repositioned without changing gear ratios. Chain drives also offer easier ratio changes by simply swapping one sprocket \u2014 a significant maintenance advantage in agricultural and conveyor applications.<\/p>\n<\/details>\n

\nQ7. Which European sprocket size in the 03B-1 series is best for a textile machine drive operating in Germany at 1500 RPM?<\/summary>\n

At 1500 RPM input speed, the ideal European Sprocket<\/strong> drive unit typically carries a higher tooth count (Z=19 to Z=25) to reduce the polygonal effect and achieve smooth chain articulation. This range produces a pitch diameter between approximately 30.4 mm and 42.0 mm \u2014 small enough for compact housings while distributing chain load across enough teeth to extend service life. For textile applications demanding low noise levels, hardened tooth flanks and precision-ground bores are recommended as standard specification.<\/p>\n<\/details>\n

\nQ8. How do I identify a genuine black European sprocket versus a low-quality replacement kettenrad zahnrader part?<\/summary>\n

Authentic black kettenrad zahnrader<\/strong> \u2014 a genuine European Sprocket<\/strong> \u2014 produced to DIN 8187 will have consistent tooth profile geometry when checked with a calibrated pitch gauge, and the bore diameter and face width (dimension A) will fall within tolerance. Low-quality imitations often show irregular tooth spacing, rough seating curve surfaces, and undersized hub diameters. When in doubt, request a dimensional inspection certificate from your supplier \u2014 a DIN-certified manufacturer should be able to provide this as standard documentation.<\/p>\n<\/details>\n<\/div>\n<\/div>\n

Editor: PXY<\/p>","protected":false},"excerpt":{"rendered":"

The 03B-1 Series European Sprockets are precision-engineered for power transmission systems, designed to mate seamlessly with 5\u00d72.5mm pitch chains according to DIN 8187 and ISO\/R 606 standards. This simplex series features a robust tooth profile with a 5mm tooth radius and 2.3mm tooth width, ensuring smooth engagement and reduced wear. Available in a wide range of sizes from 8 to 125 teeth, the sprockets offer versatile compatibility for various industrial applications. Key dimensions include a consistent hub diameter (D1) of 4-70mm and bore options (dm) ranging from 8mm to 70mm depending on the tooth count. Notably, for models with 80 teeth or more, the plate thickness increases to 4mm for enhanced durability. These sprockets are ideal for demanding mechanical drives requiring reliable performance and adherence to European manufacturing standards.<\/p>","protected":false},"featured_media":206,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-204","product","type-product","status-publish","has-post-thumbnail","product_cat-european-standard-sprockets","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/kettenrad-zahnrader.com\/id\/wp-json\/wp\/v2\/product\/204","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kettenrad-zahnrader.com\/id\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/kettenrad-zahnrader.com\/id\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/kettenrad-zahnrader.com\/id\/wp-json\/wp\/v2\/media\/206"}],"wp:attachment":[{"href":"https:\/\/kettenrad-zahnrader.com\/id\/wp-json\/wp\/v2\/media?parent=204"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/kettenrad-zahnrader.com\/id\/wp-json\/wp\/v2\/product_brand?post=204"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/kettenrad-zahnrader.com\/id\/wp-json\/wp\/v2\/product_cat?post=204"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/kettenrad-zahnrader.com\/id\/wp-json\/wp\/v2\/product_tag?post=204"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}